Brief introduction
In process production of the power transformer鈥檚 semi-finished products and finished products ,before the newly installed transformer put into operation, according to the preventive test code of the state power department, it is required to run regular transformer turns ration or voltage ratio test.
Hot tags: Transformer turns Ratio Tester, 3 phase ttr, turns ratio meter
Function Characteristics
Test wide range, the highest ratio can be measured up to 10000;
The built-in three-phase digital power supply, to improve the stability of the test;
Small volume, light weight, fast test speed,10 seconds to complete the all phase;
Z linking transformer testing;
Automatic link number test function;
No power down clock, data storaged in also inner or U disk;
The function of high and low voltage reverser polarity protection, short circuit protection.
Full penetration type large-screen LCD, can clearly show in the sun.
Technical Parameters
Range: 0.9锝?0000
resolution: Minimum 0.0001
Accuracy: 0.2Lelve
Test Voltage: 24V
Dimension: 200mm脳100mm脳60mm
Weight: 5kg
Environment temperature: -10鈩冿綖50鈩?/p>
Environment humidity: 鈮?5%RH
http://www.hvcablehipot.com/transformer-tester/
